Technical Specification

Item		Description
Basic function	Control Mode	VF control
		Sensorless flux vector control(SVC)
		Close-loop vector control(FVC)(Above 3.7kW)
	Maximum frequency	0~600Hz
	Carrier frequency	0.5kHZ——8kHz
		The carrier frequency is automatically adjusted based on the load features
	Input frequency resolution	Digital setting：0.01Hz
		Analog setting: Maximum frequency x 0.025%
	Start torque	G Type：0.5Hz/150%（SVC）
		P Type：0.5Hz/100%
	Speed range	1：100 （SVC）
	Speed stability accuracy	±0.5%（SVC）
	Overload capacity	G Type：60s for 150% of the rated current, 3s for 180% of the rated current.    P Type：60s for 120% of the rated current, 3s for 150% of the rated current.
	Torque boost	Auto-boost ;
		Customized boost: 0.1%~30.0%
	V/F Curve	Straight-line V/F curve
		Multi-point V/F curve
		N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square)
	V/F separation	2 types: complete separation; half separation
	Ramp Mode	Straight-line ramp.
		Four groups of acceleration/deceleration time with the range of 0.00`6500.0s
	DC braking	DC braking frequency：0.00Hz~Maximum frequency
		Braking time：0.0s~36.0s
		Braking action current value：0.0%~100.0%
	JOG control	JOG frequency range：0.00Hz~50.00Hz
		JOG acceleration/deceleration time: 0.0s~6500.0s。
	Simple PLC, Multiple preset speeds	It implements up to 16 speeds via the simple PLC function or combination of terminal states
	Onboard PID	It realizes process-controlled closed loop control system easily
	Auto voltage regulation (AVR)	It can keep constant output voltage automatically when the mains voltage
	Overvoltage/overcurrent stall control	The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over voltage/over current
	Rapid current limit	It helps to avoid frequent over current faults of the AC drive.
	Torque limit and control	It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be
		implemented in the FVC mode.
	Support for multiple PG card	Support for differential input PG card, resolver PG card ,rotating transformer PG card
Basic function	Simple PLC,Multiple preset	It implements up to 16 speeds via the simple PLC function or combination of terminal speeds states
	Onboard PID	It realizes process-controlled closed loop control system easily
	Auto voltage  regulation(AVR)	It can keep constant output voltage automatically when the mains voltage changes
	Overvoltage/overcurrent stall control	The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over voltage/over current
	Rapid current limit	It helps to avoid frequent over current faults of the AC drive.
	Torque limit and control	It can limit the torque automatically and prevent frequent over current tripping during the running process.Torque control can be implemented in the FVC mode.
Individualized function	High performance	Control of asynchronous motor are implemented through the high-performance current vector control technology
	Rapid dip ride through	The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time
	Support multiple PG card	Support for differential input PG card, resolver PG card, rotating transformer PG card...
	Rapid current limit	It helps to avoid frequent over current faults of the AC drive.
	Timing control	Timing range:0.0Min~6500.0Min
	Communication methods	RS-485
Running	Command source	Operation panel/Control terminals/Serial communication port. You can perform switchover between these sources in various ways.
	Frequency source	There are ten frequency sources. Digital setting, analog voltage setting, analog current setting, pulse setting, serial port setting. You can perform switchover in various ways.
	Auxiliary frequency source	There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis.
	Input terminal	Standard:4 digital input terminals(Below 5.5KW)/6 digital input terminals(Above 7.5KW);  1 analog input terminal(Below 5.5KW)/2 analog input terminals(Above 7.5KW);  1 voltage input(only support for 0~10V,above 7.5KW),1 voltage input(0~10V)or current input(4~20mA)
	Output terminal	1 High-speed pulse output terminal(Open-collector)(Above 3.7KW)
		1 replay output terminal(Below 5.5KW/2 replay output terminals(Above 7.5KW)
		1 analog output terminal(3.7KW~5.5KW)/2 analog output terminal(Above 7.5KW), Support for 4~20mA current output or 0~10V voltage output
Display and operation panel	LED display	It displays the parameters
	Key locking and function selection	It can lock the keys partially or completely and define the function range of some keys so as to prevent mal-function.
	Protection mode	Motor short-circuit detection at power-on, input/output phase loss protection, over current protection, over voltage protection, under voltage protection, overheat protection and overload protection
Environment	Installation location	Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.
	Altitude	Lower than 1000m
	Ambient temperature	-10℃~+40℃(de-rated if the ambient temperature is between 40℃~50°℃)
	Humidity	Less than 95%RH,without condensing
	Vibration	Less than 5.9m/s2(0.6g)
	Storage temperature	-20℃~+60℃

Specification

Model	Input Current ( A)	Output Power (KW)	Output Current (A)	Motor ( KW)
Input Voltage(V):1PHAC220V±15%
T9200-0R4G	5.4	0.4	2.1	0.4
T9200-0R75G	7.2	0.75	3.8	0.75
T9200-1R5G	10	1.5	7.2	1.5
T9200-2R2G	16	2.2	9	2.2
T9200-3R7G	17	3.7	17	3.7
Input Voltage(V):3PHAC380V±15%
T9400-0R4G	3.4	0.4	2	0.4
T9400-0R75G	3.8	0.75	2.5	0.75
T9400-1R5G	5	1.5	3.7	1.5
T9400-2R2G	5.8	2.2	5	2.2
T9400-3R7G/5R5P	10/15.0	3.7/5.5	9.0/13	3.7/5.5
T9400-5R5G	15	5.5	13	5.5
T9400-7R5G/11P	20/26	7.5/11	17/25	7,5/11
T9400-11G/15P	26/35	11/15.0	25/32	11/15.0
T9400-15G/18.5P	35/38	15/18.5	32/37	15/18.5
T9400-18.5G/22P	38/46	18.5/22	37/45	18.5/22
T9400-22G/30P	46/62	22/30	45/60	22/30
T9400-30G/37P	62/76	30/37	60/75	30/37
T9400-37G/45P	76/90	37/45	75/91	37/45
T9400-45G/55P	92/113	45/55	91/112	45/55
T9400-55G	113	55	112	55
T9400-75P	157	75	150	75
T9400-75G/90P	157/180	75/90	150/176	75/90
T9400-90G/110P	180/214	90/110	176/210	90/110
T9400-110G/132P	214/256	110/132	210/253	110/132
T9400-132G/160P	256/307	132/160	253/304	132/160
T9400-160G/185P	307/355	160/185	304/340	160/185
T9400-185G/200P	355/385	185/200	340/377	185/200
T9400-200G/220P	385/430	200/220	377/426	200/220
T9400-220G/250P	430/475	220/250	426/465	220/250
T9400-250G/280P	475/525	250/280	465/520	250/280
T9400-280G/315P	525/610	280/315	520/585	280/315
T9400-315G/350P	610/665	315/350	585/650	315/350
T9400-350G/400P	665/730	350/400	650/725	350/400
T9400-400G/450P	730/830	400/450	725/820	400/450
T9400-450G/500P	830/885	450/500	820/880	450/500

Wiring Diagram