Electric Cylinder Inquiry TableYear, month, dayName Contact Telephone Email Basi...
Electric Cylinder Inquiry Table | |
Year, month, day | |
Name |
|
Contact |
|
Telephone |
|
Email |
|
Basic parameters | 1. Thrust; N |
2. Stroke: mm | |
3. Speed; mm/s | |
4. Push rod position accuracy requirements: Repeated positioning accuracy mm | |
Mechanical interface | 5. Cylinder block mounting and fixation method: 口Front flange口rear flange口Bilateral trunnions, base口front and rear hinge口side holes口front pull rod |
6.Cylinder block installation orientation : 口horizontal 口vertical upward 口vertical downward 口fixed angle tilt ( degrees) 口variable angle tilt ( degrees to degrees) | |
7. Electric cylinder force output direction : 口pull 口press 口bidirectional | |
8. Does the servo motor need electromagnetic brake? 口Yes 口No | |
9. Mechanical connection mode of rod end: 口Internal thread口External thread口Universal ball joint口Fisheye joint口Floating joint | |
10. Is an external guide mechanism required? 口Yes 口No | |
11. Does the cylinder need to be installed with a proximity switch? 口Yes (number: ) 口No | |
12. Is there a requirement for compact dimensions of the electric cylinder? 口Yes (axial: mm, cross-section: mm, other ) 口No | |
13. Does the push rod need to withstand a large lateral force? 口Yes, the lateral force is approximately N. 口No | |
14. Do you need the following options? | |
口Lead Screw pre-tightening mechanism口Push rod boot口Built-in pressure sensor口Manual drive device口Food grade coating口Stainless steel housing | |
口Linear displacement sensor (accuracy: , output signal :口voltage, 口current, 口digital signal ) 口Other | |
Servo electrical interface | 15. Servo motor: 口direct-connected口fold-back type |
16. Servo motor position feedback form (regardless of whether the motor is built-in or external, please provide this information) : | |
17. Is it necessary to use a specific brand of driver or external servo motor: Yes, Yes , No | |
18Are there any special working environment requirements? 口Yes (high and low temperature: ℃, vibration: g , mechanical shock: g )口No | |
19. Are there any requirements for long-term, continuous, high-frequency, reciprocating motion? | |
Mouth has ( times Full cycle travel: mm, Frequency: Hz, Daily working hours: , Annual working days: , required lifespan: years) 口 None | |
20. Other requirements: | |
Remark |